Professional pool equipment plumbing across Wollongong, Kiama, Shellharbour and the greater Illawarra region. Pool pump connections, filter plumbing, chlorinator installation, heater connections and complete equipment pad pipework.
Pool equipment plumbing covers the pipework connections between a swimming pool's shell and its mechanical equipment — including the pump, filter, salt chlorinator, heater and automation controller. In Illawarra, pool equipment plumbing costs $200-$2,000 depending on the scope of work. A pump replacement with new plumbing connections costs $200-$500. Filter replacement including multiport valve and pipe modifications costs $250-$600. Gas pool heater installation requires both plumbing and licensed gas fitting ($500-$1,200). Salt chlorinator cell installation with bypass plumbing costs $300-$600. A full equipment pad replumb — replacing corroded or undersized pipes, valves and unions for the entire circulation system — costs $1,000-$2,000. Quality pool plumbing uses 40mm or 50mm PVC pressure pipe with solvent-welded joints, unions at each equipment connection for easy servicing, and check valves to prevent backflow. A licensed plumber ensures correct pipe sizing for optimal flow rates and equipment performance, and is required for gas heater and mains water connections.
Every pool equipment connection and pipe run handled professionally for optimal performance.
Connect new or replacement pumps with correctly sized suction and discharge lines. Install unions for easy future servicing, strainer baskets and isolation valves.
Plumb sand, glass media and cartridge filters. Install multiport valves, backwash lines, sight glasses and pressure gauges. Correct pipe sizing for optimal filtration.
Install chlorinator cells into the return line with correct flow direction, bypass valves for cell cleaning and controller mounting. All brands fitted.
Plumb gas, electric and solar pool heaters into the circulation system. Includes bypass valves, check valves and gas fitting for gas heaters by a licensed gas fitter.
Replace corroded, undersized or poorly configured equipment pad plumbing. Upgrade to correct pipe sizes, add unions and valves, and optimise flow for better performance.
Replace failed multiport valves, check valves, isolation valves and three-way diverter valves. Restore proper flow control and prevent water waste from worn seals.
New pump, filter upgrade or full replumb — we handle it all.
0411 360 263Published 2026 labour and call-out ranges for regional NSW. Roof, gutter and stormwater work is quoted per site because access and height do most of the work.
| Job | Typical range | What affects it |
|---|---|---|
| Standard hourly rate | $90 – $150 | Regional NSW. Sydney metro runs higher, to around $200. |
| After-hours & emergency hourly rate | $180 – $350 | Typically 30–50% above standard on weeknights, 50–100% weekends and public holidays. |
| Call-out fee (regional NSW) | $80 – $120 | Lower than the $100–$170 typical of Sydney metro. |
| Emergency call-out, total attendance | $250 – $700 | Callout plus first hour, before parts. |
These are typical price ranges for the Illawarra and NSW, drawn from published 2026 industry pricing data — not a quote, and not our fixed prices. What your job actually costs depends on access, the age and condition of the plumbing, parts, and whether it is after hours. We give you a fixed price before we start work, so you are never guessing. Reviewed 23 August 2026.

Kiama-based, covering Helensburgh down to Berry. Local pages with pricing and area-specific detail: